BYD Destroyer 05 Rear Trunk Spoiler

We, as a professional automotive exterior parts manufacturing factory, proudly present the Rear Trunk Spoiler designed specifically for the BYD Destroyer 05 (5th Generation DM Super Hybrid) .

The BYD Destroyer 05 is the first sedan of BYD's "Ocean Series", launched in March 2022 as a compact sedan with dimensions of 4,780×1,837×1,495mm and a wheelbase of 2,718mm, featuring a through-type taillight design at the rear. The rear trunk spoiler is installed on the upper rear edge of the trunk lid – serving as the finishing touch of the rear styling, enhancing the vehicle's sporty appearance while optimizing rear airflow, increasing downforce for improved high-speed stability.

According to product information, this spoiler is compatible with Destroyer 05 2023 and later models, manufactured from high-quality ABS engineering plastic via injection molding, available in multiple surface finish options: Primer (Gray) , High-gloss Black, Matte Black, Carbon Fiber Pattern, and Pearl White. The spoiler features 3M tape adhesive installation or self-tapping screw fixation (depending on installation method) – no drilling required for no-damage installation.

In daily use, the rear trunk spoiler is exposed to outdoor elements, sunlight, rain, and car washes – making it prone to surface aging, scratches, and deformation. It is one of the exterior parts that may require replacement in vehicle detailing and collision repairs.

Our product is strictly developed to original Destroyer 05 OE specifications, with product code AR-BYD-021. Curvature and mounting surface contours precisely match the original trunk lid 1:1. Compatible with all 2023-2025 Destroyer 05 models (55KM/120KM range versions, Champion Edition, and Glory Edition).

According to product information, this spoiler has been test-fitted on actual vehicles with 100% fitment guarantee. The Destroyer 05 measures 4,780×1,837×1,495mm with a wheelbase of 2,718mm and a trunk capacity of 450L.

The product is injection-molded from high-quality ABS material with a smooth, flat surface that resists deformation. According to modification information, spoilers, front lips, side skirts, and rear lips are popular exterior modification options for the Destroyer 05, significantly enhancing sporty appearance and aerodynamic performance.

The spoiler features 3M automotive-grade double-sided tape for adhesive installation or self-tapping screw fixation – no drilling required, no damage to trunk lid paint. Simple installation steps:

1. Clean mounting surface

2. Measure and position

3. Apply tape/screws and attach

4. Press firmly/tighten screws

According to installation tutorials, installation only requires applying adhesion promoter to the mounting surface, peeling off the 3M tape backing, and aligning to the correct position – a single person can complete installation in 10-15 minutes. Avoid car washing or water contact for 24 hours after installation to allow full adhesive curing.

 Installation Instructions

Tool Preparation:

• Clean cloth

• Alcohol/cleaner (for surface cleaning)

• Tape measure/measuring tool

• Marker pen (for position marking)

• Adhesion promoter (optional, for stronger bond)

Installation Steps:

1. Inspect Product: Carefully check the spoiler for transport damage or defects

2. Clean Mounting Surface: Thoroughly clean the trunk lid mounting area with alcohol – ensure no oil, water, or dust

3. Pre-apply Tape: Apply 3M tape along the spoiler edge

4. Measure and Mark: Position the spoiler on the trunk lid, confirm center alignment, mark the mounting area with a marker

5. Apply Adhesion Promoter (optional): Apply a small amount to the mounting surface for stronger bond

6. Peel and Apply: Peel off the tape backing, apply to the marked position – ensure centered and symmetrical

7. Press Firmly: Press evenly for >30 seconds to ensure full adhesive contact

8. Final Inspection: Confirm the spoiler is securely attached with no looseness

【Professional Tips】

• Recommended installation temperature above 15°C – low temperatures reduce tape adhesion

• Avoid car washing or water contact for 24 hours after installation

• Dry-fit the spoiler before peeling the tape backing to confirm alignment

• For stronger adhesion, self-tapping screws can be used as auxiliary fixation