BYD Song PLUS Left Front Fender Inner Lining Assembly (Left Front Wheel Arch Liner)

This product is professionally designed for BYD’s popular model—the Song PLUS, serving as a core protective component installed inside the left front wheel arch, designed to block mud, gravel, and water thrown by the tire, protecting the vehicle body and mechanical components.

As a professional manufacturing factory specializing in automotive exterior protection parts, our left front fender inner lining strictly follows OE specifications, utilizing high-density automotive-grade plastic material, dedicated to providing the global aftermarket with high-fitment, high-durability replacement solutions.

According to user feedback, the Song PLUS’s original design allows mud and water to hit the door seal, potentially causing oxidation over time. Installing the inner lining effectively blocks mud, keeping the door interior clean.

Compatible with all BYD Song PLUS trims (including DM-i/EV, 2021-2025 models). According to vehicle specifications, the Song PLUS measures 4775×1890×1670mm with a wheelbase of 2765mm. This product is specifically designed for the left front wheel with vehicle-specific fitment, using OEM mounting holes.

 Installation Instructions

Important Safety Note:
Before installation, ensure the vehicle is securely lifted and supported. No drilling is required—installation uses OEM holes and clips. Professional technician operation or DIY following video tutorials is recommended.

Tools Required:

• Phillips Screwdriver

• Plastic Pry Tool

• Included Iron Clips and Butterfly Clips (Some Products)

Installation Steps (General Reference):

1. Identify left/right: Confirm the lining marking—L for left, R for right.

2. Remove OEM screw clips: Remove the original upper and lower plastic screw clips.

3. Install iron clips: Clip the iron clips between the wheel arch and inner lining—note the lower part of the lining is not clipped inside.

4. Clip in the lining: Clip the lining in, align screw holes, and fit OEM screw posts into corresponding holes from top to bottom.

5. Tighten butterfly clips: Use included butterfly clips to tighten onto OEM screw posts.

6. Check installation: Confirm tight fit with no looseness.

【Professional Tips】:

• Note left/right distinction: The lining has left/right versions—confirm markings before installation.

• Clip position: Only align the top iron clip position—do not align screws with lower holes. Clip the wheel arch and lining together with iron clips.

• Installation time: No drilling required—one person can complete in about 10-15 minutes.