BYD Destroyer 05 Aluminum Alloy Wheel

The BYD Destroyer 05 is the first sedan of BYD's "Ocean Series", positioned as a compact sedan. The model offers 16-inch and 17-inch aluminum alloy wheel options, matched according to different configurations .According to model configuration information, the 55KM range version is equipped with 16-inch aluminum alloy wheels fitted with 225/60 R16 tires; the 120KM range version is equipped with 17-inch aluminum alloy wheels fitted with 215/55 R17 tires .

According to professional wheel data website information, the Destroyer 05 PCD (bolt pattern) is 5×114.3mm, which is a standard specification common to BYD, Toyota, Honda and other brands .

In daily use, aluminum alloy wheels are长期 subjected to road impacts and cyclic loads, making them prone to deformation, scratches, corrosion, and dynamic balance inaccuracy – one of the chassis components that may require replacement after collision repairs or extended use.

Our product is strictly developed to original Destroyer 05 OE specifications, with PCD (bolt pattern) of 5×114.3mm, and center bore and offset (ET) precisely matching the original 1:1. Compatible with all 2022-2025 Destroyer 05 models (55KM/120KM range versions, Champion Edition, and Glory Edition).

According to professional wheel data, the Destroyer 05 uses a 5×114.3mm bolt pattern, which is common across multiple BYD models. Our product requires no hub rings or spacers – direct replacement for original wheels .

The wheel is manufactured using A356 aluminum alloy low-pressure casting process, offering high tensile strength, good elongation, and excellent impact resistance. The product passes three major strength tests (impact, bending, radial fatigue) and is JWL/VIA certified.

According to BYD official configuration, the Destroyer 05 features five-spoke aluminum alloy wheel design with staggered layout and strong layering, with high recognition from the "segment" style decoration. Our product faithfully replicates the original wheel styling, consistent with the original vehicle appearance after installation .

Available in 16-inch and 17-inch specifications:

• 16-inch: For 55KM range version, fitted with 225/60 R16 tires

• 17-inch: For 120KM range version, fitted with 215/55 R17 tires

According to configuration information, 55KM range versions (55KM Honor Type/Luxury Type) are equipped with 16-inch wheels, while 120KM range versions (120KM Honor Type/Flagship Type) are equipped with 17-inch wheels. Our products correspond to original configurations for direct replacement .

Installation Instructions

Tool Preparation:

• Torque wrench (range: 80-120 N·m)

• 17mm/19mm/21mm socket (depending on lug nut spec)

• Jack, lug wrench

Installation Steps:

1. Lift Vehicle: Park vehicle on level ground, engage parking brake, lift vehicle with jack

2. Remove Old Wheel: Remove original lug nuts, take off old wheel (注意 TPMS sensor if equipped)

3. Clean Mounting Surface: Clean rust and dirt from wheel hub mounting surface

4. Install New Wheel: Align new wheel with bolt holes, hand-tighten lug nuts to prevent cross-threading

5. Torque in Sequence: Use torque wrench to tighten lug nuts in star/cross pattern in 2-3 steps; final torque 110 N·m

6. Mount Tire: If reusing original tires, mount tires to new wheels and perform dynamic balancing

7. Final Check: After lowering vehicle, re-check lug nut tightness

【Professional Tips】

• Balance Required: Wheel dynamic balancing is mandatory after wheel replacement to prevent high-speed vibration

• TPMS Sensor Transfer: If equipped with tire pressure monitoring system, transfer original valve stem sensors to new wheels

• Initial Re-torque: After 50-100km of driving, re-check torque tightness