BYD Destroyer 05 Right Outside Rearview Mirror Assembly

This product is professionally designed for BYD’s popular Ocean Series model—the BYD Destroyer 05, serving as a critical safety and visibility component mounted on the outside of the right front door for observing rear traffic conditions.

As a professional manufacturing factory specializing in automotive exterior and safety parts, our right outside rearview mirror assembly strictly follows OE specifications, dedicated to providing the global aftermarket with high-precision, high-reliability replacement solutions.

The right outside rearview mirror assembly integrates mirror adjustment mechanisms, turn signal lights, housing, and folding motor (for high-end trims)—it is a core component ensuring driving safety and providing visibility for lane changes and reversing. According to test data, the Destroyer 05 right side mirror has a field of view of 21°, ranking at the upper-middle level among same-class models.

• The right outside rearview mirror assembly is a safety vision component—no regular replacement required under normal conditions.

• When the vehicle is involved in a right-side collision accident resulting in housing damage, broken glass, or internal mechanism failure, replacement of the complete assembly is recommended rather than replacing individual parts.

Installation Instructions

Tools Required:

• Long screwdriver / Trim removal tool

• Socket wrench (10mm/12mm)

• Plastic clip removal tool

•  Electrical tape (if wiring is required)

Installation Steps (General Reference):

1. Remove Door Trim: Remove right front door interior trim panel to expose mirror mounting position and harness connector

2. Disconnect Electrical Connector: Unplug power and control harness connectors from the mirror

3. Remove Mounting Bolts: Remove mounting bolts securing mirror to door

4. Remove Old Mirror: Carefully remove the old right outside rearview mirror assembly

5. Compare & Confirm: Verify new part matches old in color, mounting hole positions, and connector type

6. Install New Mirror: Position new assembly, pre-tighten mounting bolts

7. Connect Harness: Reconnect mirror harness connector, ensure secure connection

8. Reinstall Door Trim: Reinstall door trim panel—secure clips and screws

9. Function Test: Start vehicle—test mirror adjustment, turn signal, heating, and folding functions

【Professional Tips】:

• Pay attention to housing color matching—Destroyer 05 is available in Predawn Gray, Snow White, Emperor Red, and other factory colors

• For high-trim models with 360° camera, camera calibration is required after mirror replacement

• Avoid pulling the harness during replacement to prevent internal wire damage

• Recommended to use OE No. HAD-8202109Q-D1 for precise fitment