| Brand Name: | BYD |
| Model Number: | BYD Destroyer 05 |
| MOQ: | 1 |
| Price: | Negotiable |
| Payment Terms: | L/C |
This product is professionally designed for BYD’s popular Ocean Series model—the BYD Destroyer 05, serving as a core body glass component that ensures clear driving vision and occupant safety.
As a professional manufacturing factory specializing in automotive glass and body accessories, our front windshield assembly strictly follows OE specifications, dedicated to providing the global aftermarket with high-transparency, high-impact-resistance replacement solutions.
The front windshield is an important component of the vehicle passive safety system—it not only provides a clear forward view for the driver but also serves a critical role in structural support and occupant retention during collisions. Its quality directly affects driving safety and ride comfort.
Compatible with all BYD Destroyer 05 models (including 2022-2025, 55KM/120KM range versions, Champion Edition, and Glory Edition). According to vehicle data, the Destroyer 05 body dimensions are 4780×1837×1495mm—the front windshield features a large curved design that complements the vehicle’s streamlined styling.
The front windshield is a safety glass component—no regular replacement required under normal conditions, but annual inspection of glass condition is recommended.
When cracks are located in the driver’s primary vision area and exceed 10cm in length, replacement is recommended to prevent crack expansion affecting safety.
For minor scratches or star-shaped cracks from stone chips, professional glass repair (approx. 200-400 CNY) may be considered without full glass replacement.
Recommended to replace glass seal and adhesive simultaneously to ensure watertight sealing.
Important Safety Note:
Front windshield replacement involves body structure disassembly/reassembly and adhesive curing—must be performed by professional technicians in a dedicated workstation. Do not wash the vehicle or drive at high speed for 24 hours after replacement to ensure adhesive fully cures.
Tools Required:
Glass removal tools (wire saw/special cutting knife)
Glass suction cups
Caulking gun & special polyurethane adhesive
Sealing rubber
Cleaning solvent
Installation Steps (General Reference):
Remove old glass: Use special tools to remove the damaged windshield from inside the vehicle
Clean glass frame: Thoroughly remove old adhesive residue, clean the metal frame
Pre-treat new glass: Clean the edges of the new glass, apply glass primer
Apply adhesive: Evenly apply special polyurethane adhesive to the glass frame
Install new glass: Use suction cups to carefully position and install the new glass
Adjust and press: Position the glass correctly, press to ensure full contact with adhesive
Install seals and trim: Install windshield rubber seal and trim
Curing wait: Keep vehicle stationary—allow adhesive to fully cure (typically 24 hours)
Function test: Verify wiper and rain sensor function
【Professional Tips】:
Do not wash the vehicle for 24 hours after replacement—avoid high-speed driving to prevent impact on curing
Avoid emergency braking and rapid acceleration within 72 hours after replacement to ensure proper glass fixation
In winter replacement, pay attention to indoor working temperature to ensure proper adhesive curing